SG315

Concrete - Finishes

GUIDE NOTE: Refer to Design Guide sections DG/ FABRIC, DG/ STRUCTURE, DG/ MATERIALS AND FINISHES, DG/ FLOOR

ID
Title
Compliance Level
Expand All
1
General
Mandatory
Mandatory

As per current NATSPEC except as follows:

1.6 Tolerances
 
GUIDE NOTE: Delete the flatness tolerance class table in the NATSPEC Building Template/Worksection and replace with the following: 

Class

Measurement

Maximum Deviation (mm)

A

Maximum deviation from a 3m straight edge

3

B

Maximum deviation from a 3m straight edge

6

C

Maximum deviation from a 600mm straight edge                                                              

6

 

2
Products
Mandatory
Mandatory

As per current NATSPEC.

3
Execution
Mandatory
Mandatory

As per current NATSPEC.

GUIDE NOTE:  Provide a fall of 1:200 to floor wastes in concrete slabs under timber floors (e.g. sprung floor in school halls) to drain water.  Refer to SG / SHEET FLOORING & DECKING
4
Selections
Mandatory
Mandatory

As per current NATSPEC.

Home > Specification Guide > Structure > Concrete - Finishes