SG527

Room Dividers

Title

Compliance Level

Expand All

General

Mandatory

As per current NATSPEC.

GUIDE NOTE: Refer to the EFSG DG / ACOUSTICS for room to room noise control requirements.

Products

Mandatory

As per current NATSPEC.

Execution

Mandatory

As per current NATSPEC.

Selections

Mandatory

As per current NATSPEC except as follows:

4.2 Accordion Doors

Accordion doors schedule

GUIDE NOTE:

Include the following information in the accordion doors schedule, refer to NATSPEC Building Template/ Worksection.

Include list of location/s where accordion doors are required. Refer to the Educational Facilities Standards and Guidelines.

Location:

Proprietary items:

Hufcor Group Australia - HUFCOR Series 3800
Dorma Moveable Walls Pty. Ltd - Series 3800 Accordion Door-38 Rw
Unifold Holdings Pty Ltd - Soundguard 40
Bluett and Swann Folding Walls Pty Ltd - Model BS 40
Lotus Folding Walls & Doors Pty Ltd – Timberline Acoustic Accordion Door

Type: Accordion doors.

Folding door panels:

Panels: Maximum panel width - 200 mm, arranged in a twin row, accordion configuration

Facings: Vinyl bonded with high peel-strength plastic glue.

Vibrating damping material: Install on inner surface of each panel.

Suspension system: Support track from a vertical acoustic baffle in the ceiling void all in accordance with manufacturers recommendations.

Construction tolerances:

Floors shall be level in the path of the partition with a tolerance of no more than +/- 6 mm in 3000 mm and shall include a smooth faced threshold strip.
Jambs shall be plumb. The max. variation in opening width shall be +10 mm. Track shall be adjusted and levelled at installation.

Operation: Partitions shall be top-supported manually operated doors. When fully extended and locked the accordion door shall provide a complete sound retardant closure of the opening and be laterally stable.

Stacking arrangement: In areas nominated on the drawings

Maximum overall stack width (including stile) 500 mm

Track material: Anodised extruded aluminium overhead track.

Carriages wheels: Two steel rimmed ball bearing, nylon tyred wheels installed to each module.

Warranty: The accordion doors shall be fully guaranteed by the manufacturer against defects in workmanship or materials for a period of 12 months from the date of installation.

Acoustic performance:
Weighted Sound Reduction Index (Rw) to AS/NZS ISO 717.1: 38

Accessories and trim: Fit continuous vinyl finger-type seal at the top and bottom of the door. Jambs shall have a double continuous vertical acoustic seal.

4.3 Operable Walls

Operable walls schedule

GUIDE NOTES:

Include the following information in the operable wall schedule, refer to NATSPEC Building Template/ Worksection

Include list of location/s where operable walls are required. Refer to the Educational Facilities Standards and Guidelines.

Location:

Proprietary items

Hufcor Group Australia
Bildspec Distributors Pty Ltd
Lotus Folding Walls & Doors Pty Ltd
Unifold Holdings Pty Ltd
Bluett and Swann Folding Walls Pty Ltd
Dorma Moveable Walls Pty Ltd

Type: Operable Wall

Door arrangement: Floating

Pass door: Hinged to one jamb

Height: Full height
Width: 900 mm clear opening

Folding door panels: Size: Equal sized panels not more than 1200 mm wide.

Facing, Pin board wall lining: Refer to SG / L INING

Suspension system: Overhead structural support with an adjustable track support system all in accordance with manufacturer’s recommendations.

Removable panel/s: Refer to SG / L INING

Construction tolerances

Floors shall be level in the path of the partition with a tolerance of no more than +6 mm in any direction and shall include a heavy-duty threshold strip.
Jambs shall be plumb. The max. variation in opening width shall be +6 mm. Track shall be adjusted and levelled at installation. Provide sufficient clearance at track ends to permit future adjustments of track without damage to material adjacent to track or partition.

Operation: Partitions shall be top-supported manually operated panels. When fully extended and locked the operable wall shall provide a complete sound retardant closure of the opening and be laterally stable.

Stacking arrangement: In areas nominated in the drawings.

Locating bolt: Flush mounted locating foot bolt to be installed on the jamb of the operable wall panel adjacent to the pass door.

Track material: Anodised or powder coated extruded aluminium or powder coated steel overhead track.

Carriage wheels: Steel rimmed ball-bearing, nylon tyred wheel carriers to each panel

Warranty: The operable room divider shall be fully guaranteed by the manufacturer against defects in workmanship or materials for a period of 12 months from the date of installation.

Weighted Sound Reduction Index (Rw) to AS/NZS ISO 717.1:

General Learning Areas in all schools: 45 minimum
Other areas:

GUIDE NOTE: Refer to EFSG DG / ACOUSTICS for room to room noise control.

Test certificate: Certify that the partitions are of the same basic construction as that used to achieve the acoustic performance claimed by the manufacturer. Provide a current Australian Test Certificate from a NATA approved Testing Laboratory for tests.

Accessories and trim

Vertical sound seals: Anodised extruded aluminium stiles with two resilient PVC gaskets between each panel..

Horizontal top seal

Mechanical operated

Continuous contact vinyl balloon type

Continuous contact finger type

Horizontal bottom seal

Type: Spring loader cam-over throw mechanically operated expansion system with a downward pressure range between 40 to 50Kg.
Construction, mechanically operated system: Metal

Hardware

Pass door latch set

Operation/maintenance manual (mandatory)

Provide an operation and maintenance manual clearly showing the correct use of the operable wall and recommended servicing periods and procedures.
Preference will be given to NSW based Maintenance and Service providers for all Operable Wall installations.