1 GENERAL
As per current NATSPEC except as follows:
GUIDE NOTE: The roadworks ancilliaries worksection is to be written in full under the NATSPEC Building Template - Site.
Location |
Finish |
Heavy duty service roads (concrete). |
Incorporate a synthetic colouring agent in controlled quantities for the whole thickness of the slab to effectively to reduce glare. Submit samples of the coloured concrete to the Principal’s Authorised Person / Principal’s Representative before construction. GUIDE NOTE: Select the required colour from the list below. Nominate the selection in hte colour schedule (colours based on Lanxess Bayer’s pigments)
(i) Red 110 (ii) Chrome oxide green GN (iii) Charcoal/black 330 Colours: Refer to DG / COLOURS & FINISHES SCHEMES ADMINISTRATION |
Bulk waste pad when linked to the heavy duty service road (concrete) |
Incorporate a synthetic colouring agent in controlled quantities for the whole thickness of the slab to effectively to reduce glare. The colour and colouring agent proportions to be the same as the heavy-duty service road. |
GUIDE NOTE: If road humps are to be installed to the service roads, refer to AS1742; use the “Watts Profile” road hump. Alternatively use a proprietary high impact composition rubber type with rounded ends, coloured with yellow and black. Appropriate signage to be in accordance with AS1742.