Suspended Ceilings - Combined

As per current NATSPEC except as follows: 

Performance Criteria

Suspended ceiling system selections should be based on the following performance criteria:

• Offer value for money in a Whole of Life framework;
• Should use readily available commercial proprietary components
• Have appropriate aesthetic appeal.  Pre-finished surfaces are advantages to reduce future maintenance requirements.
• Offer long life span with high durability and robustness.
• Have low maintenance requirements and costs. Visible surfaces should be capable of being easily cleaned and repaired if damaged.
• Provide appropriate functionality for the location and use of the area including:
• Acoustic suitability to expected background and activity noise levels
• Appropriate aesthetic appeal when finished
• Water resistance in wet areas
• Impact resistance.
• Support sustainability by having recycling potential at the end of usable life, and/or include recycled content.
• Compliance with BCA Fire Hazard Properties

4.5 Acoustic Ceilings
 

GUIDE NOTE: Refer to the Educational Facilities Standards and Guidelines for areas which require Acoustic Ceilings. 

Select an acoutic ceiling system from the following alternatives. Specify the appropriate acoustic blanket to suit the requirements of the room. 

Corrugated and perforated metal ceiling lining – standard profile
Type: Proprietary perforated and roll-formed corrugated steel zincalume sheet and purpose made accessories forming part of a system to AS 1562.1.

• Furring/fixing system: Proprietary black matt finished universal carrier rails or furring system.  Comply with the manufacturer’s recommended spacings, spans and fixing requirements.
• Wall trims: Cold rolled steel angles, colour finish to match ceiling panels, fixed to walls at 600 mm centres.

Material: Pre-painted and organic film/laminate products: To AS 2728, Category 3 or 4 as appropriate to all ceiling sheets/panels and metal trims.

Thickness: 0.42 mm (minimum) B.M.T. (Base Metal Thickness)

Corrugation depth: 16 mm (minimum)

Suspension system:

• Concealed suspended ceiling grid

Acoustic blanket: Polyester fibre black lined acoustic blanket manufactured from thermally bonded polyester.

• Standard: To AS 3742
• Finish: Black

Corrugated and perforated metal ceiling lining – mini profile
Type: Proprietary perforated and roll-formed corrugated steel zincalume sheet and purpose made accessories forming part of a system to AS 1562.1.

• Furring/fixing system: Proprietary black matt finished universal carrier rails or furring system.  Comply with the manufacturer’s recommended spacings, spans and fixing requirements.
• Wall trims:  Cold rolled steel angles, colour finish to match ceiling panels, fixed to walls at 600 mm centres.

Material: Pre-painted and organic film/laminate products: To AS 2728, Category 3 or 4 as appropriate to all ceiling sheets/panels and metal trims.

Thickness: 0.42 mm (minimum) B.M.T. (Base Metal Thickness).

Corrugation depth: 6 mm (minimum).

Suspension system:

• Concealed suspended ceiling grid

Acoustic blanket: Polyester fibre black lined acoustic blanket manufactured from thermally bonded polyester.

• Standard: To AS 3742
• Finish: Black

Linear metal ceiling lining

Type: Perforated linear metal ceiling - school series, consisting of panels made from colour-coated 0.4mm thick galvanised steel, 84mm wide x 15mm deep with square sides.

Finish: Polar White, 5% gloss.

Suspension system: Panel carriers made from colour-coated 0.5mm thick steel, matt black, 62mm wide x 29mm deep, with prongs to hold the panels in a module of 50mm.

Installation: In accordance with the manufacturer’s fixing instructions.

Acoustic blanket: Polyester fibre black lined acoustic blanket manufactured from thermally bonded polyester.

• Standard: To AS 3742
• Finish: Black

Perforated plasterboard ceiling
Type: 13mm thick perforated plasterboard sheet.

Plasterboard: To AS/NZS 2588

Suspension system:

• Concealed suspended ceiling grid.

Acoustic blanket: Polyester fibre black lined acoustic blanket manufactured from thermally bonded polyester.

• Standard: To AS 3742
• Finish: Black

Acoustic impervious suspended ceiling

Type: Fire resistant proprietary acoustic impervious ceiling panels with a high density, resin bonded insulation with primed edges and a white micro-porous painted surface specially designed for use in hygienic locations. The surface must be capable of being cleaned on a regular basis with a damp cloth.

Size (nominal): 1200 x 600 x 20mm thick or 600 x 600 x 20mm thick.

Suspension system: A proprietary corrosion resistant grid suspension system in accordance with the manufacturers printed instructions.  Provide accessories and trim to complete installation.

Installation:

• Seal between panels and back face of grid with a silicone sealer.  Leave two panels near entrance to room unsealed for access above ceiling.
• Provide openings for, and fit the ceiling system up to, service elements such as light fittings and ventilation grilles.  Seal all penetrations with a impervious joint sealing compound
• Cut edges must be resealed with an impervious edge sealer.
• Ceiling clips: Proprietary compatible anti lift ceiling clips.  Clips are to be evenly configured in accordance with the manufacturers printed instructions.

NRC: >85

Weight including grid system (nominal): 3 – 4kg/m²

Colour: White