SG671

Painting

ID
Title
Compliance Level
Expand All
1
General
Mandatory
Mandatory

As per current NATSPEC.

 

2
Products
Mandatory
Mandatory
As per current NATSPEC.
3
Execution
Mandatory
Mandatory

As per current NATSPEC except as follows: 

3.1 Preparation 

 

Substrate preparation

GUIDE NOTE: Add the following text to subslause  “Substrate preparation” in NATSPEC Building Template/ Worksection


Line marking, operator zones:  Before sealing prepare area by washing with neutral detergent and rinse with clean warm or hot water prior to setting out line markings.

Coating, anti graffiti barrier:  The surface to be clean, dry and dust free prior to application.

NSW Government Site Signs:  All surfaces to be clean and dust free prior to application.

  • Surface Preparation: Unprimed or damaged painted steelwork to be abrasive blast cleaned to AS1627 Part A, Class 2.5.
  • Primed Steelwork:  Brush down and degrease using white spirit.
  • Galvanised Steelwork:  Galvanised steelwork to be painted to be degreased using white spirit washed with water and treated with a waterborne etch primer preparation coat designed for used on galvanised steelwork in accordance with manufacturer's recommendations.
  • Aluminium: Aluminium surfaces to be painted should be lightly sanded using emery cloth and mineral turpentine as a lubricant.  Surfaces should be cleaned with mineral turpentine, washed thoroughly and dried to AS 1627, Part 1.  Etch priming and painting should follow as soon as possible.

Reconditioning damaged surfaces in galvanised steel: For galvanised surfaces that has been subsequently welded or damaged.

  • To AS/NZS 4680 Appendix E

Chemical store surface preparation

Floor, new concrete (fully cured 28 days):  Surface must be free of curing compounds, oils and grease.  Remove laitance by acid etching or mechanical means such as shot blasting or high pressure water blasting.  Allow to dry and remove loose sand and dust by vacuum cleaning or sweeping.

Wall, masonry:  The surface must be free from surface defects, clean, dry and dust free prior to application.

Sectional overhead doors preparation
Door structure:  Abrasive blast clean to AS 1627.4 Class 2.5

3.2 Painting
 
GUIDE NOTE: Delete paragraph “Repair of galvanizing” nominated in the NATSPEC Building Template/ Worksection and include the following.
 

Reconditioning damaged surfaces in galvanized steel

General: For galvanized surfaces that has been subsequently welded or damaged.

  • To AS/NZS 4680 Appendix E and AS/NZS 3750.9

GUIDE NOTE: Add the following subslauses to “Painting” in NATSPEC Building Template/ Worksection

Timber floor finishing
Strip and parquet flooring: 3 coats of tung oil seal, 3 coats of a high solid content cross-linked acrylic polymer clear wood floor finish.

  • High solid content cross-linked acrylic polymer clear wood floor finish:
    • Standards:                                          ISO 9002
    • Slip resistance to AS 3661.1:             0.5 (minimum)
    • Solids by weight, %:                           39.0 (nominal)
    • pH:                                                      8.5 – 9.5
  • Allow a minimum of 7 days curing time for the tung oil before applying the acrylic polymer clear wood floor finish. 

Note: Some hardwood species may require longer times for the tung oil to cure before applying the acrylic polymer finish.

  • Prior to applying acrylic polymer finish to the whole floor undertake a test on a small area of the floor (generally in a corner) to determine if the tung oil seal has adequately cured to permit sufficient adhesion.
  • Application must be undertaken in accordance with manufacturers printed instructions.

Interior plywood wall lining finishing (lime wash effect)
Description: Proprietary semi-transparent low odour water dispersed polyurethane interior timber finish.

Finish: Formulated to produce a controlled lime wash effect

GUIDE NOTE: The proprietary item nominated below (“Intergrain Ultraclear Low Sheen”) has been formulated for use in schools. 


Proprietary item: Intergrain Ultraclear Low Sheen

  • Tinted to 50% liming white (Based on “Intergrain Ultraclear”)
  • Gloss level: Low sheen

Application, new timber

  • Apply by using a synthetic pad applicator and brush
  • Two coats direct from can (do-not thin)
  • Lightly sand between coats.
  • Allow a minimum of 3 hours drying between coats.
  • Filling: Fill gaps, cracks and nail holes with a compatible filler colour matched to the finish, sand smooth.
  • Refer to manufacturer’s printed technical data sheets for detailed instructions.

Interior clear timber finish

GUIDE NOTE: Refer to SG / PAINTING / PAINT SYSTEMS / TRANSPARENT WATER-BORNE INTERIOR TIMBER FINISH


Description: Proprietary premium transparent low odour water dispersed polyurethane interior timber finish.

  • Gloss level: High

Application, new timber

  • Apply by using a synthetic pad applicator and brush
  • Two coats direct from can (do-not thin)
  • Lightly sand between coats.
  • Allow a minimum of 3 hours drying between coats.
  • Filling: Fill gaps, cracks and nail holes with a compatible filler colour matched to the finish, sand smooth.
  • Refer to manufacturer’s printed technical data sheets for detailed instructions.
4
Selections
TBC
TBC

As per current NATSPEC except as follows: 

GUIDE NOTE: Add the following clause:

4.1 Painting Systems
 

Coating system, metal

GUIDE NOTE: A site analysis must be undertaken to determine the specific atmospheric environment prior to developing an appropriate paint system for all metal fixtures including aluminium, organic or inorganic zinc primed metal, hot dipped galvanised metal.

For the corrosion protection for all structural steel refer to the Structural engineer’s specification.

GUIDE NOTE:Ensure the structural engineer  provides a site specific detailed specification for corrosion protection and coating systems for all structural steel.
4.2 Painting Schedules
 
GUIDE NOTE: Guide to painting schedules.
Listed below are finish coat requirements for school buildlings.

Semi gloss latex (acrylic),  for use on internal walls (excluding canteens).

Light colour gloss latex (acrylic), for use on canteen internal walls and ceilings. 
Low gloss latex (acrylic) interior, for use on internal ceilings. Do not use on surfaces likely to be soiled. 
Flat latex (acrylic) interior, for use on internal ceilings only. Do not use on walls or any other surfaces likely to be soiled. 
Full gloss solvent borne interior, use on doors, door frames and trim. 
Solvent bome interior, must not be used except for doors, door frames and trim. 
Flat latex (acrylic) exterior, use on exterior of buildings for finishing primed and undercoated timber, ad metal, for priming and finishing masonry and concrete surfaces. 
Low gloss latex (acrylic) exterior, use on exterior of buildings for priming and finishing masonry and concrete surfaces. 
Premium quality paints must be used for these substrates. 

Occupied buildings: the use of Very low VOC and very low odour paints is preferred for painting interiors of occupied school buildings (Refer applicable systems in Paint systems schedule below).

Gloss latex (acrylic): Interior

Substrate, Walls

1st Coat

2nd Coat

3rd Coat

Concrete, Cement render, Fibre cement, Masonry, Plasterboard (paper faced),

 

*Dulux Acrylic Sealer Undercoat eco choice

OR

*Taubmans Ultraprep undercoat

OR

*Wattyl i.d Primer Sealer Undercoat

OR

*Bristol Easy Living Sealer Undercoat

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss.

 

* Wattyl i.d Gloss Acrylic
 

 

*Bristol Easy Living Gloss

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss.

 

* Wattyl i.d Gloss Acrylic
 

 

*Bristol Easy Living Gloss

Set plaster, Fibrous plaster, Glass reinforced gypsum plaster.

 

*Dulux Sealer Binder
 

OR

*Taubmans Petriseal All Purpose Sealer

OR

* Wattyl Pigmented Wallboard sealer

OR

*Bristol Pigmented Oil Sealer

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss.
 

 

* Wattyl i.d Gloss Acrylic

 

 

*Bristol Easy Living Gloss

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss.
 

 

* Wattyl i.d Gloss Acrylic

 

 

*Bristol Easy Living Gloss

Existing paintwork (solvent borne) (Interim)

 

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans All Purpose Undercoat

OR

*Wattyl i.d Multi Purpose Undercoat

OR

*Bristol Supreme Interior Undercoat

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss (Acrylic)

 

*Wattyl i.d Gloss (Acrylic)
 

 

*Bristol Easy Living Gloss (Acrylic)

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss (Acrylic)

 

*Wattyl i.d Gloss (Acrylic)
 

 

*Bristol Easy Living Gloss (Acrylic)

Existing paintwork (latex borne)

 

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

OR

*Taubmans Living Proof Gloss (Acrylic)

OR

* Wattyl i.d Gloss Acrylic

OR

*Bristol Easy Living Gloss (Acrylic)

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss (Acrylic)

 

* Wattyl i.d Gloss Acrylic

 

*Bristol Easy Living Gloss (Acrylic)

 
 

Pre primed board.

 

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

OR

*Taubmans Living Proof Gloss (Acrylic).

OR

* Wattyl i.d Gloss Acrylic

OR

*Bristol Easy Living Gloss (Acrylic)

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss (Acrylic).

 

* Wattyl i.d Gloss Acrylic

 

*Bristol Easy Living Gloss (Acrylic)

 

Timber, Particleboard, Hardboard (unprimed), Organic fibre board,

Medium density fibreboard

 

*Dulux Acrylic Primer Undercoat

OR

*Taubmans Ultraprep Wood Primer

OR

* Wattyl Primer Sealer Undercoat

OR

*Bristol Weathertough Sealer Undercoat

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss (Acrylic).

 

* Wattyl i.d Gloss Acrylic
 

 

*Bristol Easy Living Gloss (Acrylic)

*Dulux Wash & Wear 101 Advanced Gloss Acrylic.

 

*Taubmans Living Proof Gloss (Acrylic).

 

* Wattyl i.d Gloss Acrylic
 

 

*Bristol Easy Living Gloss (Acrylic)

 

Semi gloss latex (acrylic): Interior

Substrate, Walls

1st Coat

2nd Coat

3rd Coat

Concrete, Cement render, Fibre cement, Masonry, Plasterboard (paper faced),

*Dulux Acrylic Sealer Undercoat eco choice

 

OR

*Taubmans Ultraprep undercoat

OR

* Wattyl i.d Primer Sealer Undercoat

 

OR

*Bristol Easy Living Sealer Undercoat

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin.

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)
 

*Bristol Easy Living Scrub Satin

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin.

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)
 

*Bristol Easy Living Scrub Satin

Set plaster, Fibrous plaster, Glass reinforced gypsum plaster.

*Dulux Sealer Binder
 

 

OR

*Taubmans Petriseal All Purpose Sealer

OR

*Wattyl Pigmented Wallboard Sealer

 

OR

*Bristol Pigmented Oil Sealer

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin.
 

 

*Wattyl i.d Acrylic Satin
(Very low VOC very low odour)
 


*Bristol Easy Living Scrub Satin

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin.
 

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)
 


*Bristol Easy Living Scrub Satin

Existing paintwork (solvent borne)

(Interim)

*Dulux 1 Step Oil Based Primer Sealer Undercoat

 

OR

*Taubmans All Purpose Undercoat

OR

*Wattyl i.d Multi Purpose Undercoat

OR
 

*Bristol Supreme Interior Undercoat

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin (Acrylic)

 

*Wattyl i.d Acrylic Satin
(Very low VOC very low odour)

*Bristol Easy Living Scrubbable Satin (Acrylic)

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin (Acrylic)

 

*Wattyl i.d Acrylic Satin
(Very low VOC very low odour)

*Bristol Easy Living Scrubbable Satin (Acrylic)

Existing paintwork (latex borne)

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

OR

*Taubmans Living Proof Satin (Acrylic)

OR

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)

OR

*Bristol Easy Living Scrubbable Satin (Acrylic)

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin (Acrylic)

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)

 

*Bristol Easy Living Scrubbable Satin (Acrylic)

 
 

Pre primed board.

 

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

OR

*Taubmans Living Proof Satin (Acrylic).

OR

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)

OR

*Bristol Easy Living Scrubbable Satin (Acrylic)

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin (Acrylic).

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)

 

*Bristol Easy Living Scrubbable Satin (Acrylic)

 

Timber, Particleboard, Hardboard (unprimed), Organic fibre board,

Medium density fibreboard

*Dulux Acrylic Primer Undercoat

 

OR

*Taubmans Ultraprep Wood Primer

OR

*Wattyl i.d Primer Sealer Undercoat

 

OR

*Bristol Weathertough Sealer Undercoat

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin (Acrylic).

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)
 

*Bristol Easy Living Scrubbable Satin (Acrylic)

*Dulux Wash & Wear 101 Advanced Semi Gloss Acrylic.

 

*Taubmans Living Proof Satin (Acrylic).

 

* Wattyl i.d Acrylic Satin
(Very low VOC very low odour)
 

*Bristol Easy Living Scrubbable Satin (Acrylic)

 

Low gloss latex (acrylic): Interior

Substrate, Ceilings

1st Coat

2nd Coat

3rd Coat

Concrete, Cement render, Fibre cement, Masonry, Plasterboard (paper faced), Medium density fibreboard

*Dulux Acrylic Sealer Undercoat eco choice

OR

*Taubmans Ultraprep undercoat

OR

* Wattyl i.d Primer Sealer Undercoat
 

OR

*Bristol Easy Living Sealer Undercoat

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)
 

*Bristol Easy Living Low Sheen (Acrylic)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)
 

*Bristol Easy Living Low Sheen (Acrylic)

Set plaster, Fibrous plaster, Glass reinforced gypsum plaster.

 

*Dulux Sealer Binder
 

OR

*Taubmans Petriseal All Purpose Sealer

OR

*Wattyl Pigmented Wallboard Sealer
 

OR
*Bristol Pigmented Oil Sealer

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)
 

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)
 

*Bristol Easy Living Low Sheen (Acrylic)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)
 

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)
 

*Bristol Easy Living Low Sheen (Acrylic)

Existing paintwork (solvent borne)

(Interim)

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans All Purpose Undercoat

OR

* Wattyl i.d Multi Purpose Undercoat
 


OR

*Bristol Supreme Interior Undercoat

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

 

*Bristol Easy Living Low Sheen (Acrylic)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

 

*Bristol Easy Living Low Sheen (Acrylic)

Existing paintwork (latex borne)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

OR

*Taubmans Living Proof Silk (Acrylic)

OR

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

OR

*Bristol Easy Living Low Sheen (Acrylic)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

 

*Bristol Easy Living Low Sheen (Acrylic)

 
 

Pre primed board.

 

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

OR

*Taubmans Living Proof Silk (Acrylic)

OR

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

OR

*Bristol Easy Living Low Sheen (Acrylic)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

 

*Bristol Easy Living Low Sheen (Acrylic)

 

Timber, Particleboard, Hardboard (unprimed), Organic fibre board

*Dulux Acrylic Primer Undercoat

OR

*Taubmans Ultraprep Wood Primer

OR

*Wattyl i.d primer sealer Undercoat

 

OR

*Bristol Weathertough Sealer undercoat

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk (Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

 

*Bristol Easy Living Low Sheen (Acrylic)

*Dulux Wash & Wear 101 Advanced Low Sheen Acrylic.

 

*Taubmans Living Proof Silk(Acrylic)

 

* Wattyl i.d Acrylic Low Sheen (Very low VOC very low odour)

 

*Bristol Easy Living Low Sheen (Acrylic)

 

Low gloss latex (acrylic): Exterior

Substrate

1st Coat

2nd Coat

3rd Coat

Concrete, Cement render, Fibre cement, Masonry, UPVC

 

 

*Dulux Weathershield X10 Low Sheen Acrylic

OR

*Taubmans All Weather Low Sheen

OR

*Wattyl Solagard Low Sheen

OR

*Bristol Weathertough Low Sheen

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans All Weather Low Sheen

 

* Wattyl Solagard Low Sheen

 

*Bristol Weathertough Low Sheen

 

Exterior grade hardboard

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans Wood Primer

 

OR

*Wattyl i.d Wood Primer
 

OR

*Bristol Pink Primer

 

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans Timber Top Colour Low Sheen

 

* Wattyl Solagard Low Sheen

 

*Bristol Weathertough Low Sheen

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans Timber Top Colour Low Sheen

 

* Wattyl Solagard Low Sheen

 

*Bristol Weathertough Low Sheen
 

Existing paintwork (latex borne)

*Dulux Weathershield X10 Low Sheen Acrylic

OR

*Taubmans

All Weather or Sunproof

Low Sheen Acrylic

OR

* Wattyl Solagard Low Sheen

OR

*Bristol Weathertough Low Sheen

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans

All Weather or Sunproof

Low Sheen Acrylic

 

* Wattyl Solagard Low Sheen

 

*Bristol Weathertough Low Sheen

 

Existing paintwork (solvent borne)

(Interim)

*Taubmans

3 in 1 undercoat, sealer, primer

*Taubmans

All Weather or Sunproof

Low Sheen Acrylic

*Taubmans

All Weather or Sunproof

Low Sheen Acrylic

Compressed fibre cement

*Dulux Sealer Binder

 

OR

*Taubmans Armawall Sealer/Bonder

 

OR

*Wattyl Pigmented Wallboard Sealer
OR

*Bristol Pibmented Oil Sealer

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans

All Weather or Sunproof

Low Sheen Acrylic

 

* Wattyl Solagard Low Sheen

 

*Bristol Weathertough Low Sheen

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans

All Weather or Sunproof

Low Sheen Acrylic

 

* Wattyl Solagard Low Sheen

 

*Bristol Weathertough Low Sheen

 

Substrate

1st Coat

2nd Coat

3rd Coat

4th Coat

Timber

 

 

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans Wood Primer (oil based)
 

OR

*Wattyl i.d Wood Primer
 

OR
 

*Bristol Supreme Pink Primer

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans All Purpose Undercoat
 

 

*Wattyl i.d Multi  Purpose Undercoat

 

*Bristol Supreme Exterior Undercoat

*Dulux Weathershield X10 Low Sheen Acrylic

 

*Taubmans All Weather or Sunproof Low Sheen
 

* Wattyl Solagard Low Sheen
 

 

*Bristol Timbercoat Low Sheen

 

 

 

*Taubmans All Weather or Sunproof Low Sheen
 

* Wattyl Solagard Low Sheen
 

 

*Bristol Timbercoat Low Sheen

 

 

Gloss latex (acrylic): Exterior

GUIDE NOTE: External timber doors should be painted with a light colour. Intense colours may cause doors to warp due to heat absorption.

Substrate

1st Coat

2nd Coat

3rd Coat

Concrete, Cement render, Fibre cement, Masonry.

*Dulux Weathershield X10 Gloss Acrylic

OR

*Taubmans All Weather or Sunproof Gloss

OR

*Wattyl Solagard Gloss

OR

*Bristol Weathertough Gloss Acrylic

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss

 

* Wattyl Solagard Gloss

 

*Bristol Weathertough Gloss Acrylic

 

Exterior grade hardboard

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans Wood Primer
 

OR

*Wattyl i.d Wood primer
 

OR

*Bristol Supreme Exterior Undercoat

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss

 

* Wattyl Solagard Gloss

 

*Bristol Weathertough Gloss Acrylic

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss

 

* Wattyl Solagard Gloss

 

*Bristol Weatherglo Gloss Acrylic

Existing paintwork (latex borne)

*Dulux Weathershield X10 Gloss Acrylic

OR

*Taubmans All Weather or Sunproof Gloss

OR

* Wattyl Solagard Gloss

OR

*Bristol Weathertough Gloss Acrylic

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss

 

* Wattyl Solagard Gloss

 

*Bristol Weathertough Gloss Acrylic

 

 

Existing paintwork (solvent borne)

(Interim)

*Taubmans

3 in 1 undercoat, sealer, primer

*Taubmans All Weather or Sunproof Gloss

*Taubmans All Weather or Sunproof Gloss

Compressed fibre cement

*Dulux Sealer Binder

 

OR

*Taubmans Armawall Sealer/Bonder

OR

*Wattyl Pigmented Wallboard Sealer

OR

*Bristol Pigmented Oil Sealer

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss
 

Wattyl Solagard Gloss


 

*Bristol Weathertough Gloss Acrylic

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss
 

Wattyl Solagard Gloss


 

*Bristol Weathertough Gloss Acrylic

 

Substrate

1st Coat

2nd Coat

3rd Coat

4th Coat

Timber

(Interim)

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans Wood Primer (oil based)
 

OR

*Wattyl i.d Wood Primer
 

OR

*Bristol Supreme Pink Primer

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Purpose Undercoat
 

 

*Wattyl i.d Multi Purpose Undercoat

 

*Bristol Supreme Exterior Undercoat

*Dulux Weathershield X10 Gloss Acrylic

 

*Taubmans All Weather or Sunproof Gloss

 

* Wattyl Solagard Gloss
 

 

*Bristol Weathertough Gloss Acrylic

 

 

 

*Taubmans All Weather or Sunproof Gloss

 

* Wattyl Solagard Gloss
 

 

*Bristol Weathertough Gloss Acrylic

 

Gloss, latex (acrylic): Interior

Substrate

1st Coat

2nd Coat

3rd Coat

Timber, Particleboard, Hardboard (unprimed), Pre primed board, Organic fibreboard.

*Dulux Acrylic Primer Undercoat

OR

*Taubmans Ultraprep Wood Primer

OR

*Wattyl i.d Primer Sealer undercoat
 

OR

*Bristol Weather- tough Sealer Undercoat

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

*Taubmans Living Proof Gloss (Acrylic)

 

*Wattyl i.d Gloss Acrylic

 

 

*Bristol Easy Living Scrubbable Gloss (Acrylic)

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

* Taubmans Living Proof Gloss (Acrylic)

 

* Wattyl i.d Gloss Acrylic

 

 

* Bristol Easy Living Scrubbable Gloss (Acrylic)

Medium density fibreboard

*Dulux Acrylic Sealer Undercoat eco choice

OR

*Taubmans Ultraprep Undercoat

OR

*Wattyl i.d Primer sealer Undercoat

OR

*Bristol Easy Living Sealer Undercoat

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

* Taubmans Living Proof Gloss (Acrylic)

 

* Wattyl i.d Gloss Acrylic
 

 

* Bristol Easy Living Scrubbable Gloss (Acrylic)

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

* Taubmans Living Proof Gloss (Acrylic)

 

* Wattyl i.d Gloss Acrylic
 

 

* Bristol Easy Living Scrubbable Gloss (Acrylic)

Existing paintwork (solvent-borne)

(Interim)

Note:

Solvent borne topcoats must not be used over latex (acrylic) paints.  Use latex (acrylic) paints

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans All Purpose Undercoat (solvent based)

OR

*Wattyl i.d Multi Purpose Undercoat
 

OR

*Bristol Supreme Interior Undercoat

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

*Taubmans Living proof Gloss (Acrylic)

 

 

*Wattyl i.d Gloss Acrylic

 

 

*Bristol Easy Living Gloss (Acrylic)

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

*Taubmans Living proof Gloss (Acrylic)

 

 

*Wattyl i.d Gloss Acrylic

 

 

Bristol Easy Living Gloss (Acrylic)

 

Existing paintwork
(latex borne)

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

OR

*Taubmans Living Proof Gloss (Acrylic)

OR

* Wattyl i.d Gloss Acrylic

OR

*Bristol Easy Living Gloss (Acrylic)

* Dulux Wash & Wear 101 Advanced Gloss Acrylic

 

* Taubmans Living Proof Gloss (Acrylic)

 

* Wattyl i.d Gloss Acrylic

 

* Bristol Easy Living Gloss (Acrylic)

 

Full gloss, Solvent borne: Interior

GUIDE NOTE: External timber doors should be painted with a light colour. Intense colours may cause doors to warp due to heat absorption.

Substrate

1st Coat

2nd Coat

3rd Coat

Timber doors, door frames and trim.

 

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans All Purpose Undercoat

OR

*Wattyl i.d Multi Purpose Undercoat

OR

*Bristol Supreme Interior Undercoat

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl i.d High Gloss Enamel

 

*Bristol Supreme High Gloss Enamel

* Dulux Super Enamel High Gloss

 

* Taubmans Ultra Gloss Enamel

 

* Wattyl i.d High Gloss Enamel

 

* Bristol Supreme High Gloss Enamel

Galvanised and Zincalume/ Organic or inorganic zinc primed metal, non-structural steel in a Category A or B location to AS/NZS2312 only.

 

*Dulux Quit Rust Galvanised Iron Primer Plus

OR

*Taubman’s Ultraprep Undercoat

OR

*Wattyl Killrust Galvanised Primer

OR

*Bristol Weathertough Metal Primer

*Dulux Super Enamel High Gloss

 

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl Killrust SPE Enamel
 

 

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss

 

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl Killrust SPE Enamel
 

 

*Bristol Supreme High Gloss Enamel

Full gloss, solvent borne: Exterior

GUIDE NOTE: External timber doors should be painted with a light colour.  Intense colours may cause doors to warp due to heat absorption.

Substrate

1st Coat

2nd Coat

3rd Coat

Timber

 

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans Wood Primer (oil based)

OR

*Wattyl i.d Wood Primer
 

OR

*Bristol Supreme Pink Primer
 

*Dulux Super Enamel High Gloss

 

*Taubmans All Purpose Undercoat (solvent based)

*Wattyl i.d Multi Purpose Undercoat

 

*Bristol Supreme Exterior Undercoat

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

* Wattyl i.d High Gloss Enamel

 

*Bristol Supreme High Gloss Enamel

Iron and steel, non-structural in a Category A or B location to AS/NZS2312 only.

 

*Dulux Quit Rust Metal Primer x 2 coats

OR

*Taubmans PrepRight Iron and Steel Primer x 2 coats

OR

*Wattyl Killrust Metal primer x 2 coats

OR

*Bristol Stop Rust Red Oxide Primer x 2 coats

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

 

*Wattyl Killrust SPE Enamel

 

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

 

*Wattyl Killrust SPE Enamel

 

*Bristol Supreme High Gloss Enamel

Zinc coated and zinc-alloy-coated steel, Organic or inorganic zinc primed metal, non-structural in a Category A or B location to AS/NZS2312 only.

 

*Dulux Quit Rust Galvanised Iron Primer Plus

OR

*Taubmans Ultraprep Galvanised Iron Primer

OR

*Wattyl Killrust Galvanised Iron Primer

OR

*Bristol Weathertough Metal Primer

*Dulux Super Enamel High Gloss
 

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl Killrust SPE Enamel

 

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss
 

 

*Taubmans Ultra Gloss Enamel
 

 

*Wattyl Killrust SPE Enamel

 

*Bristol Supreme High Gloss Enamel

Oil based air-drying primed non-structural metal in a Category A or B location to AS/NZS2312 only.

Pre-primed exterior grade hardwood.

 

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans All Purpose Undercoat (solvent based)

OR

*Wattyl i.d Multi Purpose Undercoat
 

OR

*Bristol Supreme Exterior Undercoat

*Dulux Super Enamel High Gloss
 

 

*Taubmans Ultra Gloss Enamel

 

 

*Wattyl i.d High Gloss Enamel
 

 

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss
 

 

*Taubmans Ultra Gloss Enamel

 

 

*Wattyl i.d High Gloss Enamel
 

 

*Bristol Supreme High Gloss Enamel

Cat. epoxy zinc phosphate primed metal, non-structural in a Category A or B location to AS/NZS2312 only.

 

*Dulux Super Enamel High Gloss

OR

*Taubmans Ultra Gloss Enamel

OR

*Wattyl Killrust SPE Enamel

OR

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl Killrust SPE Enamel

 

*Bristol Supreme High Gloss Enamel

 

Compressed fibre cement

*Dulux Sealer Binder

OR

*Taubmans Armawall Sealer/Bonder

OR

*Wattyl pigmented Wallboard Sealer

OR

*Bristol Pigmented Oil Sealer

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl i.d High Gloss Enamel
 

 

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

*Wattyl i.d High Gloss Enamel
 

 

*Bristol Supreme High Gloss Enamel

Existing paintwork (solvent-borne)

(Interim)

Note:

Solvent borne topcoats must not be used over latex (acrylic) paints.  Use latex (acrylic) paints

*Dulux 1 Step Oil Based Primer Sealer Undercoat

OR

*Taubmans All Purpose Undercoat (solvent based)

OR

* Wattyl i.d Multi Purpose Undercoat

OR

*Bristol Supreme Exterior Undercoat

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

 

*Wattyl i.d High Gloss Enamel

 

*Bristol Supreme High Gloss Enamel

*Dulux Super Enamel High Gloss

 

*Taubmans Ultra Gloss Enamel

 

 

*Wattyl i.d High Gloss Enamel

 

*Bristol Supreme High Gloss Enamel

 

Existing vermiculite ceiling

Water based, V.O.C free, Non Toxic specialised vermiculite paint system that bonds, seals and retains the flame retardant properties of the substrate.

Substrate

1st Coat

2nd Coat

Additional  Coats

Existing vermiculite ceiling

*Durobond Vermiculite Re-Coat

*Durobond Vermiculite Re-Coat

*Durobond Vermiculite Re-Coat if required to achieve uniform cover
GUIDE NOTE:  Durobond vermiculite recoat system (code: 362-06) must be applied in accordance with the manufacturer’s recommendations. It is advised to test the existing vermiculite ceiling for asbestos prior to the start of painting work.

 

Road marking paint
Water borne coating approved for RTA R141 and AS/NZ 4049.3

Substrate

1st Coat

 

 

Concrete/Asphaltic Concrete

0041/2

(P-41)

 

 

Line marking - operator zones, epoxy finish
Lead free pigmented polyamide cured epoxy finish.

Substrate

1st Coat

2nd Coat

3rd Coat

Industrial Sheet Flooring

2971 (C-29/7) - Part of system

Epoxy enamel finish - Part of system

Epoxy enamel finish  - Part of system

Line marking, gymnasium, enamel

Automotive enamel suitably thinned with appropriated thinners.

Substrate

1st Coat

2nd Coat

 

Strip Flooring/Parquet Flooring

 

 

 

Line marking, safety zones, enamel
Automotive enamel suitably thinned with appropriated thinners.

Substrate

1st Coat

2nd Coat

 

Strip Flooring/Parquet Flooring

 

 

 

Protective coat systems
Two pack polyurethane opaque.

**paint reference to AS 2312

Substrate

1st Coat

2nd Coat

3rd Coat

Chemical Store:

Substrate

Floor, concrete

Wall, masonry

6**

100% solids, high build self priming two pack pigmented epoxy coating

DFT (Dry Film Thickness): 150-200 microns.

3**

100% solids, high build self priming two pack pigmented epoxy coating

DFT: 150-200 microns.

3**

 

Coating - anti graffiti barrier, colourless

GUIDE NOTE: The Colourless Anti Graffiti Barrier described below is based on ‘Durobond paints -anti graffiti sealer’. terrazo partitions are specified to have a graffiti barrier coating applied by the manufacturer, additional coating not required for new terrazo partitions – but may be suitable for old terrazo partitions.

Other proprietary Colourless Anti Graffiti BarrierS that comply with the specification requirements described below may also be acceptable.

Substrate

1st Coat

2nd coat

 

Precast Partitions – Terrazzo

 

Non-sacrificial inorganic silicone product with etching additive

N/A

 

 

Tung oil

GUIDE NOTE: Specification reference for details of finish refer to Execution – PREPARATION in this painting section.

Substrate

1st Coat

2nd Coat

3rd Coat

Strip Flooring/Parquet Flooring, Timber

 

 

 

 

High solid content cross-linked acrylic polymer clear wood finish

GUIDE NOTE: Specification reference for details of finish refer to Execution – PREPARATION in this painting section.

Substrate

1st Coat

2nd Coat

3rd Coat

Strip Flooring/Parquet Flooring, Timber

 

 

 

Semi-transparent water-borne interior timber finish (Lime wash effect)

GUIDE NOTE: Specification reference for details of finish refer to Execution – PREPARATION in this painting section.

Substrate

1st Coat

2nd Coat

Plywood wall lining (new timber)

 

 

Transparent water-borne interior timber finish

GUIDE NOTE: Specification reference for details of finish refer to Execution – PREPARATION in this painting section.

Substrate

1st Coat

2nd Coat

New timber

 

 

Rear - NSW Government site signs
White, low gloss - direct to preprimed wood fibre board.

Substrate

1st Coat

2nd Coat

3rd Coat

Preprimed wood fibre board

0280/3

(GPC-L-26/3).

0280/3

(GPC-L-26/3).

 

Face - NSW Government site signs

Substrate

1st Coat

2nd Coat

3rd Coat

Direct to pre-primed wood fibre board.

2971

(GPC-C-29/7)

(Two pack solvent borne white primer based on an epoxy resin)

Recoatable two pack epoxy acrylic gloss coating.

Dry film thickness (DFT):  50 micrometres

 

Framing/support - NSW Government site signs

Substrate

1st Coat

2nd Coat

3rd Coat

Mild Steel

AS2312: 6

Two pack solvent borne polymide cured epoxy primer with zinc phosphate anti-corrosive pigmentation

DFT: 75 micrometres

Recoatable two pack epoxy acrylic gloss coating.

Dry film thickness

(DFT):  50 micrometres

Recoatable two

pack epoxy

acrylic gloss

coating.

Dry film

thickness

(DFT): 50 micro-

metres
GUIDE NOTE:  Paint System for aluminium refer to NATSPEC Building Template - APAS Paint Systems 
 

Acoustic ceiling - Performance Workshop Type 1 and 2

Substrate

1st Coat

2nd Coat

3rd Coat

Corrugated metal ceiling or Linear metal ceiling

 

Factory applied two pack general purpose polyurethane undercoat

Factory applied two pack urethane black matt enamel system.

 

Sectional Overhead Doors, Door Structure

Substrate

1st Coat

2nd Coat

3rd Coat

Mild Steel

2908

(GPC-C-29/8)

Factory applied inorganic zinc primer

Factory applied two pack polyurethane primer

Factory applied two pack polyurethane high gloss coating,

 

Line marking

GUIDE NOTE:  Insert project specific locations. Refer to Educational Facilities Standards and Guidelines and Supplements. 


Location                                      
Operator Zones

Safety Zones – Sectional Overhead Doors.

Application: Mark out zones with temporary guide lines and obtain approval by the Principal’s Authorised Person / Principal’s Representative before applying line markings.

Internal timber floors: Allow first coat of Tung Oil to dry for 12 hours, prior to setting out markings.  Sand lightly the areas of line marking with a medium abrasive pad or steelwool pad and apply line markings.  Apply final coats of tung oil and cross-linked polymer clear floor finish after line marking is completely dry and after approval of painter (apply cross-linked polymer clear floor finish after tung oil has been fully cured).  Allow to dry for three days before using floor.

Other than timber: Apply line marking finish when surface is dry.

Allow a minimum of 24 hours before using floor.

GUIDE NOTE:  Line marking, Gymnasiums finish for timber flors only. Insert appropriate location. Refer to the Educational Facilities Standards and Guideilnes. 

Location  
Gymnasium Size

Application: Mark out courts as set out in the drawings with temporary guide lines and obtain approval by the Principal’s Authorised Person / Principal’s Representative before applying line markings. 

Allow first coat of Tung Oil to dry for 12 hours, prior to setting out court markings.  Sand lightly the areas of line marking with a medium abrasive pad or steelwool pad and apply line markings.  Apply final coats of tung oil and cross-linked polymer clear floor finish after line marking is completely dry and after approval of painter (apply cross-linked polymer clear floor finish after tung oil has been fully cured).  Allow to dry for three days before using floor.

Court dimensions

  • Basketball court markings: Refer to the current “International Basketball Federation (FIBA)” court dimensions (available through Basketball Australia).
  • Netball court markings: Refer to the current “International Federation of Netball Associations” court dimensions (available through Netball Australia)
  • Volleyball court markings: Refer to the current “FIVB Official Rules" (available through Sydney Volleyball).

GUIDE NOTE: Refer to EFSG SG DRAWING / SG502/2 – badminton court dimensions.  Insert project specific drawing number.

  • Badminton: Refer drawing >

Road marking
To be applied by a specialist line marking contractor

  • Safety zones
  • Games Courts

Games Courts dimensions

  • Basketball court markings: Refer to the current “International Basketball Federation (FIBA)” court dimensions (available through Basketball Australia).
  • Netball court markings: Refer to the current “International Federation of Netball Associations” court dimensions (available through Netball Australia)
  • Volleyball court markings: Refer to the current “FIVB Official Rules" (available through Sydney Volleyball).
  • Tennis court markings: Refer to “Tennis NSW - Technical Services” for the current court dimensions.

 

Coating, anti graffiti barrier, colourless

Location
Terrazzo, toilet/shower partitions.

Application

  • Must be undertaken by an applicator approved by the manufacturer
  • Apply to manufacturer’s instructions.

NSW Government site signs

Signs, rear:  Apply two coats of exterior grade, 100% acrylic latex low gloss paint direct to the preprimed wood fibre signboard.

Signs, face:  Apply one coat of exterior grade low gloss white primer, two pack solvent borne based on an epoxy resin and one coat of a recoatable two pack epoxy acrylic (gloss finish) direct to the preprimed wood fibre sign board.

Mild steel:  Apply one coat of a two pack solvent borne primer and two coats of a recoatable two pack epoxy acrylic (gloss finish) to mild steel members.

Aluminium:  Apply etch primer and two coats of an exterior grade full gloss enamel to aluminium members.

Number of coats:  The number of coats specified is the minimum and additional coats will be applied at the contractor's expense if required to achieve the required film build and standard of finish.

Chemical resistant finish
Location:  Chemical Store

Application:  Apply two coats of a high build self priming two pack pigmented epoxy coating direct to substrate with a roller (medium to long nap to suit surface roughness) use a brush for cutting in and for small areas.

Mixing:  The mix ratio is to be in accordance with the manufacturers printed instructions.

Cure (natural):  Seven days.

Cure (fan forced):  8 hrs. at 60 deg. C.

Sectional overhead doors
Door Structure:  Factory applied inorganic zinc primer and two pack polyurethane coatings, in accordance with manufactures printed instructions.

Application:  Conventional spray

4.6 Line Marking Schedule 
 

GUIDE NOTE:  Insert project specific locations. Refer to the Educational Facilities Standards and Guidelines.

Location

Surface

Paint system

Colour

Width

Carpark

Asphaltic concrete

Road marking paint

Yellow

50mm

> 

Asphaltic concrete

> 

> 

> 

> 

> 

Games Court - Basketball

Asphaltic concrete

Road marking paint

Yellow

50mm

Games Court - Volleyball

Asphaltic concrete

Road marking paint

Red

50mm

Games Court - Netball

Asphaltic concrete

Road marking paint

Green

50mm

Games Court - Tennis

Asphaltic concrete

Road marking paint

White

50mm

Gymnasium - Basketball

Timber

Enamel, Vehicles

Yellow

50mm

Gymnasium - Volleyball

Timber

Enamel, Vehicles

Red

50mm

Gymnasium - Badminton

Timber

Enamel, Vehicles

White

38mm

Gymnasium - Netball

Timber

Enamel, Vehicles

Green

50mm

Safety Zones – Sectional Overhead Doors

Timber

Enamel, Vehicles

Yellow

50mm

Safety Zones – Sectional Overhead Doors

Asphaltic concrete or concrete

Road marking paint

Yellow

50mm

 

GUIDE NOTE: Add the following subclause to  “Selections” nominated in the NATSPEC Building Template/ Worksection
4.7 Paint Removal
 

GUIDE NOTE:  For projects involving paint removal include as a new clause before 4.1 Painting and Renumber clauses to suit. 

Lead based paint removal
Remove paint containing greater than 0.25% lead prior to the preparation of substrate to receive systems specified.

Standards:  To AS 4361.2

  • All lead based paint is to be removed completely back to substrate.
  • Removal method is to be non dust producing, (ie. not abrasive blasting or mechanical sanding).

Inspection: On completion notify the Principal’s Authorised Person / Principal’s Representative who will arrange for the site to be tested and issue of a Clearance Certificate when all work is satisfactorily completed.

Protection of Children:  Children are to be kept out of work areas at all times until the Clearance Certificate has been issued.

All work except for minor remedial work is to be carried out during school holidays.  Minor remedial works is to be carried out outside school hours.

Protection of Workers:

  • Showers are to be provided on or near site and all workers are required to shower before leaving the site at the end of each work day.

Repainting: Repainting process is only to be carried out after the Principal’s Authorised Person / Principal’s Representative has issued a Clearance Certificate.  Painting of adjacent surfaces must not be carried out during the lead base paint removal process.

Returfing:  Where lead based paint removal has been carried out on external surfaces bare soil adjacent to the removal site is to be tested and, if contaminated, removed to a depth of 100 mm and replaced with fresh top soil and turf.

4.8 Completion
 

Floor maintenance
Provide a copy of the manufacturers written instructions for the care and maintenance of the timber floor.

Maintenance Instructions:

  • Size: A4 (minimum)
  • Instructions: Brief precise text with corresponding graphics
  • Finish: Laminated
  • Location/Distribution: Cleaning Supervisor/Supplies, Cleaning Distributed Stores.  Hand one copy to the Principal’s Authorised Person / Principal’s Representative
  • Fasten to wall in a clearly displayed position
Home > Specification Guide > Finishes > Painting