To be located by the DoE Project Director, in conjunction with the School Principal.
Fabric:- Aluminium or other approved material.
Spaces/Requirements:- 250mm run of seating per student
Height:
Refer to:
EFSG HS603.03 / Seating
EFSG PS603.05 / Seating
SG / METALWORK / SEATS
SG DRAWINGS / SG603/5
DG / LANDSCAPE HARD WORKS / SEATING STEPS
Refer to:
EFSG PS610.02 / Passive Play Open Areas
DG / LANDSCAPE DESIGN / GROUND WORKS
SG / SUNDRY ITEMS
Refer to:
DG / CIVIL WORKS / CRICKET PRACTICE NETS
EFSG HS505.04 / Batting Practice Nets
SG DRAWINGS / SG505/8
Fabric:
Provision of play equipment in new primary schools is standard procedure. A nominal budget is included as part of the overall cost of a new primary school build.
Play equipment should be chosen and designed in accordance with relevant Australian Standards (AS4685 and AS4422), EFSG Design Principles and ‘Playing Safe: Guidelines for the installation and maintenance of playground equipment in NSW government schools’, published by the NSW Department of Education.
Ongoing safety checks and maintenance of the play equipment is the responsibility of the school, and should be undertaken in accordance with Australian Standards AS4685.
Play equipment provided by a school may require location or relocation. Location to be determined/approved by DoE.
Where a rainwater tank/s is installed, the harvested water should be used to supplement a drip irrigation system/s (existing or new). Tap mechanism for manual use with power provision for pump.
Refer to DG / WATER / WATER TANKS
Services:-
Refer to EFSG Zone Detail Pages (PS610, HS610, SSP610)